Japan (日本語)
Select your country and region
Japan (日本語)

LOCTITE® 3D IND405 Clear

Clear photopolymer with a smooth surface finish and good impact resistance. Ideal for mechanical guides, fluid ducts, and microfluidic devices. Also suitable for light pipe and packaging prototyping.
LOCTITE® 3D IND405 Clear is a one-part semi-rigid 3D printable resin with good impact strength and elongation. IND405 comes off the printer frosted but can be polished to an optically clear finish. This material can be machined, tapped and polished, and is ideal for microfluidic devices as well as guide overlays. Based on its unique set of performance attributes, its qualities are most comparable to unfilled polypropylene.
Key Features
  • check Good impact strength
  • check 120% elongation at break
  • check 52MPa ultimate tensile strength
  • check Heat deflection temperature: 53° C (127.4° F)
  • check Excellent surface quality
  • check Clear finish with secondary process

対応する3Dプリンタ

Origin Two 3D Printer

Origin Two

A true injection molding alternative for economical low and medium volume production, with matching accuracy, repeatability and surface finish, in a broad range of performance materials. 

Learn More
origin one 3d printer

Origin® One

幅広い高性能材料によって最終部品の柔軟な生産が可能になる、革新的な3Dプリンタ。プログラマブル光重合化P3™テクノロジーにより、業界最高水準の精度、一貫性、精巧さ、スループットを 実現 できます。3Dプリンティングの新時代に備えよう。

詳細はこちら

This is also compatible with 385 and 405 nm open DLP and LCD printers

ダウンロード

Origin® Oneの材料比較

ダウンロード

Additional resources

Enventys heater holder

ストラタシスOrigin Oneでコストを削減し、パフォーマンスを向上させる

Learn how Enventys Partners delivers end-use biocompatible devices, while avoiding long lead times and high costs with the Stratasys Origin One.

続けて見る
Origin Swabs Printing On a Origin One

Ramping up to half a million 3D printed test swabs

When the COVID-19 pandemic hit, so did an urgent need for large supplies of personal protective equipment (PPE) for healthcare providers and nasopharyngeal swabs for COVID-19 testing. Supply chain disruptions immediately followed, due to complicated supply chains with overwhelmed suppliers and difficult-to-source components. A reliance on a few vendors, instead of multiple supplier sources, and enormous product demand made it difficult for health care providers to secure inventory and layered on additional challenges.

続けて見る
Origin One printing process close up.

How Origin One and Forward AM drive material development.

Learn why Origin One’s leading Open Materials License is based on feedback from three years of deep partnerships with leading chemical manufacturers.

続けて見る
Enventys heater holder

Learn how Enventys Partners delivers end-use biocompatible devices, while avoiding long lead times and high costs with the Stratasys Origin One.

続けて見る
Origin Swabs Printing On a Origin One

When the COVID-19 pandemic hit, so did an urgent need for large supplies of personal protective equipment (PPE) for healthcare providers and nasopharyngeal swabs for COVID-19 testing. Supply chain disruptions immediately followed, due to complicated supply chains with overwhelmed suppliers and difficult-to-source components. A reliance on a few vendors, instead of multiple supplier sources, and enormous product demand made it difficult for health care providers to secure inventory and layered on additional challenges.

続けて見る
Origin One printing process close up.

Learn why Origin One’s leading Open Materials License is based on feedback from three years of deep partnerships with leading chemical manufacturers.

続けて見る